Poster session I & Exhibition Cocktail
Tuesday, September 24, 2019
Conferences, Poster
•
P1
•
5:20 PM
>
7:00 PM
•
Poster session I & Exhibition Cocktail
•
Gould Area
until 23:00
•
DEPO -P1-011
•
Antifogging surfaces prepared from plasma copolymerization
>
F.
Fabienne
Poncin-Epaillard
•
DEPO -P1-034
•
A low-temperature (330 °C) deposition of high-performance thermochromic VO<sub>2</sub>-based coatings for smart-window applications
>
T.
Tomáš
Bárta
•
DEPO -P1-038
•
Growing controllable-crystalline aluminium nitride thin films by plasma-enhanced atomic layer deposition at low temperature and its properties
>
T.
Tai
Nguyen
•
DEPO -P1-040
•
The role of atomic oxygen in the growth of single phase β-MnO<sub>2</sub> thin films by remote plasma assisted pulsed laser deposition
>
M.
Malek
Tabbal
•
DEPO -P1-053
•
Water stability of organosilicon coatings prepared by atmospheric pressure plane-to-plane dielectric barrier discharge
>
L.
Luc
Stafford
•
DEPO -P1-063
•
Influence of the film thickness on the structure, optical and photocatalytic properties of TiO<sub>2</sub> thin films deposited by ICP-PECVD
>
W.
William
Ravisy
•
DEPO -P1-074
•
Porous silicon double membranes for lithium- ion batteries
>
C.
Chafiaa
Yaddaden
•
DEPO -P1-108
•
Effect of the silicon substrate nitridation on optical and electrical properties of silicon carbonitride thin films deposited by reactive magnetron sputtering
>
E.
Eric
Tomasella
•
DEPO -P1-109
•
Hollow cathode plasma sputtering for coating the 90<sup>o</sup> elbow vacuum chambers of the ELENA antiproton ring at CERN
>
A.
Antonios
Sapountzis
•
DEPO -P1-128
•
Pulsed Electron Cyclotron Wave Resonance Plasma Enhanced Chemical Vapour Deposition of photocatalytic TiO2 thin films on polymeric substrates
>
B.
Benjamin
Dey
•
DEPO -P1-145
•
Time resolved In situ characterization of deposited SiCN:H thin films obtained in Ar/TMS/N2 dual ECR and RF-PVD by infrared absorption spectroscopy (FTIR)
>
Z.
Ziad
Al Hallak
•
DEPO-P1-171
•
Oblique deposition of nickel thin films by HiPIMS
>
H.
Hamidreza
Hajihoseini
•
DEPO-P1-181
•
Organosilicon coatings deposited by cold nitrogen plasma post-discharge for prevention of biofilm formation in food and medical sectors
>
C.
Charafeddine
JAMA
•
GROM -P1-010
•
CrN thin film synthesis in Ar/N2 and Ar/NH3, a comparative study
>
E.
Emile
Haye
•
GROM -P1-044
•
Reactivity to organic vapors at PECVD PDMS-like surfaces for gas detection and membrane separation
>
G.
Ghadi
Dakroub
•
GROM -P1-083
•
Prediction of the column tilt angle in GLAD by sputtering
>
A.
Aurélien
Besnard
•
GROM -P1-084
•
Low pressure plasma polymerization of cylclopropylamine in a hollow cathode reactor
>
S.
Stephane
Lucas
•
GROM -P1-086
•
PVD large scale growth simulation: Influence of the substrate roughness
>
A.
Aurélien
Besnard
•
GROM -P1-098
•
Preparation of DLC films by microwave plasma-assisted chemical vapour deposition in open-air
>
H.
Hidetsugu
Yagi
•
GROM -P1-114
•
Bio-inspired functional coatings on plasma-processed polymeric materials for vehicular interiors
>
H.
Hernando III
Salapare
•
HELI -P1-085
•
Surface functionalisation, nanoroughness and drug delivery by atmospheric plasma jet on scaffolds
>
A.
Alessandro
Patelli
•
INDU -P1-020
•
Titanium nitrides coating for hard chromium replacement
>
M.
Marjorie
Cavarroc
•
INDU -P1-136
•
Atom Probe Tomography Analysis for Additive Manufacturing
>
A.
Anna
BUI
•
INDU-P1-188
•
From Component to System for a Faster Technology
>
A.
Andreea
Vasiliu
•
LIQU -P1-049
•
Study of the synthesis of nanoparticles in liquid phase enhanced by microsecond plasma discharges at atmospheric pressure
>
S.
Stephane
Cuynet
•
SURF -P1-043
•
Physicochemical modification of spin-coated TiO2 nanoparticle thin film by ICP low pressure oxygen plasma
>
M.
Maria
Mitronika
•
SURF -P1-051
•
Functionalization and characterization study of Metal Organic Frameworks (MOF) by plasma process
>
A.
Aymane
Najah
•
SURF -P1-055
•
The role of SiF4 physisorption in silicon cryoetching
>
T.
Thomas
Tillocher
•
SURF -P1-082
•
Measuring the energy flux at the substrate during plasma based deposition techniques: a way to investigate both the sputtering process and the film growth
>
A-L.
Anne-Lise
Thomann
•
SURF -P1-146
•
Study of interactions between a PMMA support and cold plasma used for thin film deposition.
>
M.
Mohamed Mounder
Kouicem
•
SURF -P1-148
•
Etching of Ge-Sb-Se glasses in SF<sub>6</sub> and SF<sub>6</sub>/Ar plasma
>
T.
thibaut
Meyer
•
SURF -P1-150
•
Physicochemical modification of spin-coated silver nanoparticle thin film by atmospheric surface-wave microwave post-discharge
>
L.
Luc
Stafford
•
SURF -P1-159
•
Patterning at micrometric scale of metallic surfaces by plasma etching
>
F.
feriel
Laourine
•
TRIB -P1-015
•
Optimization of Mo-S-N solid lubricant films with improved adhesion and low friction by DC magnetron sputtering.
>
K.
Kaushik
Hebbar Kannur
•
TRIB -P1-030
•
CHARACTERIZATION OF DUPLEX, NANOCOMPOSITE AND NANOLAYERED THIN FILMS
>
B.
Branko
Skoric
•
TRIB -P1-068
•
Study of Cr, CrN, CrAlN monolayers and Cr/CrN/CrAlN multilayers developed by DC magnetron sputtering for mechanical application
>
C.
Corinne
Nouveau
•
TRIB -P1-080
•
Tribological behavior of ZrN/Ta Coatings Deposited by RF Magnetron Sputtering on Ti-6Al-4V and CoCrMo Alloys
>
C.
Corinne
Nouveau
•
TRIB -P1-103
•
<strong><em>Reactive HiPIMS deposition of Ti-Al-N: Influencing the Cubic to Wurtzite phase transition</em></strong>
>
L.
Lukas
Zauner
|