Poster session 1
Tuesday, September 12, 2023
Posters, Poster
SOUR
•
PS 1
•
5:30 PM
>
7:30 PM
•
Poster session 1
•
Gould area
SOUR
•
DEPO-P1-018
•
Effect of interfacial SiNX ultra-thin film on optical and electrical properties of PVD antireflective coating
>
B.
Beji
HIBA
•
DEPO-P1-026
•
Effect of Tantalum addition on properties of Cu–Zr–based Thin Film Metallic Glasses (TFMGs)
>
S.
Soufyane
ACHACHE
•
DEPO-P1-039
•
Development and characterization of chromium-based PVD coatings for the protection of stainless steel bipolar plates for PEM fuel cells
>
J.
JORDI
ORRIT-PRAT
•
DEPO-P1-067
•
Tailoring surface properties of Zr-V thin films by competitive self-separation of crystalline and amorphous phases during sputtering
>
R.
Raya
EL BEAINOU
•
DEPO-P1-182
•
Synthesis of Multifunctional Flexible Zn-Al Based Oxide Thin Film with Antibacterial and Moisture Barrier Properties using Atomic Layer Deposition System
>
J.
JiHo
EOM
•
DEPO-P1-193
•
Impact of plasma assistance on SiO2 and HfO2 thin films physicochemical and photometric aging properties
>
A.
Arthur
SOUTENAIN
•
DEPO-P1-197
•
Sputtering Techniques for Smart Textiles
>
D.
Dirk
HEGEMANN
•
DEPO-P1-207
•
Using evaporation to create hydrophobic coating
•
GROM-P1-063
•
Depth Resolved XRD Measurements using in-situ XRD during Ion Beam Sputtering
>
S.
Stephan
MÄNDL
•
GROM-P1-123
•
"MISSTIC": a multi-tool experimental setup for magnetron sputtering deposition combined with in situ and real-time characterization
>
H.
hervé
MONTIGAUD
•
GROM-P1-126
•
Augmented reality representation for the investigation of simulated inclined chromium thin films
>
N.
Noé
WATIEZ
•
GROM-P1-149
•
Chromium carbide coatings by DC sputtering of a sintered target.
>
A.
Aurélien
BESNARD
•
GROM-P1-199
•
Ion beam sputter deposition of epitaxial Ga2O3 thin films on c-plane Al2O3
>
D.
Dmitry
KALANOV
•
HELIAG-P1-044
•
Polysaccharide coatings for urinary catheters
>
A.
Alenka
VESEL
•
HELIAG-P1-099
•
Plasma Polymer Coatings of Non-planar Materials for Bioapplications
>
L.
Lucie
JANŮ
•
HELIAG-P1-101
•
Towards a development of integrated micro-electro-apta-sensors into a diabetes organoid-on-a-chip device.
>
A.
Axelle
AUBERT
•
HELIAG-P1-177
•
Influence of varying plasma parameters on the response of MG-63 osteoblast-like cells onto poly(allylamine) thin films
>
H.
Hernando III
SALAPARE
•
HELIAG-P1-203
•
Investigation of toxicity of Plasma Activated Water on Lemna Minor
>
N.
Nevena
PUAC
•
ITEC-P1-107
•
Industrial Technology for ta-C Coatings Deposition
>
J.
Jan
KLUSON
•
ITEC-P1-110
•
Innovative conformal deposition solution into TSV integration for oxide, nitride, and metal layers by pulsed liquid precursor injection
>
P-D.
Pierre-David
SZKUTNIK
•
NANO-P1-017
•
Localized laser texturing of passivating nano-layer deposited by PVD for industrial olfactory sensors applications
>
W.
William
RAVISY
•
NANO-P1-096
•
Zirconium-based nanocatalysts by sputtering onto glycerol and solid carbon
>
S.
Soumya
ATMANE
•
NANO-P1-132
•
Direct Liquid Reactor-Injector of Nanoparticles: a safer-by-design aerosol injection for nanocomposite thin-film deposition adapted to various plasma-assisted processes
>
R.
Richard
CLERGEREAUX
•
NANO-P1-144
•
Optical and structural analysis of silicon nitride co-doped with erbium and ytterbium
>
A.
Afaf
BRIK
•
NANO-P1-194
•
Structural and chemical characterizations of nanostructured cermet aluminium oxy-nitride / copper films
>
M.
Mireille
RICHARD-PLOUET
•
NANO-P1-202
•
Synthesis of ultra-thin film MAA:PEGDMA hydrogels with customized properties by atmospheric pressure plasma
>
J.
Jordi
SANS
•
PROC-P1-098
•
Optical diagnostics of a N2/Ar microplasma for the deposition of hexagonal Boron Nitride.
>
B.
Belkacem
MENACER
•
PROC-P1-129
•
Tuning plasma-droplet interactions in dielectric barrier discharge at atmospheric pressure for thin-film deposition
>
L.
Luc
STAFFORD
•
PROC-P1-131
•
Time-Resolved Optical Emission Spectroscopy Analysis of a low-pressure RF Plasma with Pulsed Injection of Argon, Pentane, and ZnO Nanoparticles
>
M.
Marguerite
DION
•
PROC-P1-137
•
Developing a method with optical emission spectroscopy to control thin layer in R-HiPIMS deposition process
>
D.
Dimitri
BOIVIN
•
PROC-P1-142
•
Study of N2/H2 plasmas produced by an active screen source: contamination due to NO production and role of hydrogen in the gas mixture.
>
R.
Robert
HUGON
•
PROC-P1-174
•
Impact of electronegativity and monoenergetic electrons on the properties of electrostatic sheaths in magnetized discharge plasmas.
>
S.
Samir
CHEKOUR
•
PROC-P1-185
•
Pulsed aerosol assisted plasma deposition: influence of the injection parameters
>
R.
Richard
CLERGEREAUX
•
PROC-P1-189
•
In-Situ Temperature Measurement of Components in PECVD Machines with a 3-Fold Rotation
>
P.
Paul
JÄCKH
•
PROC-P1-195
•
Equivalent electrical circuit modeling of a He dielectric barrier discharge plasma jet
>
M.
Marija
PUAČ
•
SOUR-P1-143
•
Dynamics of the material ejection in a dipolar arc in DC regime and its connection to the arc noise
>
R.
Robert
HUGON
•
SOUR-P1-152
•
O2 shielding modulates the spatiotemporal density of Ar(1s5) in argon atmospheric-pressure micro-plasma jets
>
J.
Joao
SANTOS SOUSA
•
SOUR-P1-158
•
New micro-plasma reactors for the synthesis of heterostructures of 2D films of hexagonal Boron Nitride and Graphene
>
A-A.
Abd-Almalik
HALFAOUI
|